Non Load Bearing Wall | Cost to Remove a Non Load Bearing Wall (2024)

Non Load Bearing Wall

Non load bearing walls separate the room by dividing it inside the house. Thus, such walls do not support the structural weight of the building. Therefore, they do not carry the extra weight of the structure of the building other than their own.

Most builders use load-bearing walls as interior walls when building a house. If the landlord hires a designer or architect to make plans for his building, he should consider before removing the wall for future renovations.

The best way to understand what effect they will have if the walls present in the construction of the house are removed is to know whether the wall is load-bearing or not, which will ensure safe renovation of the building and reduce project costs.

The use of load bearing wallsand non load bearing walls in a building, in general, is important in the structure. Any building is built using two types of walls- exterior walls and interior walls. The use of exterior walls, in general, provides a basic structure around your home and protects it from unwanted environments. Interior walls, on the other hand, divide the room.

What Is Non-Load Bearing Wall?

Which Wall is not used as a support in the R.c.c frame structure. It only holds the frame in what is known as a non load bearing wall. This wall is also commonly called the “curtain wall.”

Non load bearing walls are used indoors. These types of walls are mainly used in the building as a room divider. These types of walls mostly don’t work for any other purpose.

This type of wall can be removed without compromising the safety of the building. Because it is not responsible for gravity support in the structure of the building. This type of wall separates the room without supporting any load or weight of the ceiling or floor.

This type of wall is only able to support its own weight and it is able to withstand the force of the wind blowing as the outer wall in the building; It cannot support the weight of the building structure on its own. It has a non-tolerant wall compared to a load-bearing wall.

Also Read:What Is Retaining Walls? | Uses of Retaining Wall | Types of Retaining Wall | Advantages of Retaining Wall

Application of Non Load Bering Wall

1. Any non load bearing walls can be removed for renovation, without losing the safety of the house structure.
2. Mostly, high rise building is designed to separate the floor into spaces as interior walls.
3. The non load bearing wall is made to reduce the dead load in the structure of the building.
4. The lightweight material is usually used for this type of wall. So. It is safely used as a non load bearing wall in a building structure.
5. It does not carry any load in the structural frame system in the building. Therefore, the architecture in the building can be given a beautiful look.
6. In this type of wall opening for doors and windows can be made easily. Which does not affect the performance of the structure of the entire building.
7. This type of wall can be easily renovated by removing any part of the building at any time and in any area.

Thickness of Non load bearing Wall

Exterior non-bearing masonry is designed based on wall thickness requirements. The standard specification for brick masonry wall by ACI 530-11 should be used. It typically has 152 mm (6 inches) for a one-story building and 203 mm (8 inches) for a multi-story building.

Also Read:

Types of Non-Load Bearing Walls

1. Hollow Concrete Block Wall:

Non load bearing wall is done in the internal part of the building using hollow blocks as walls. It gives stability and strength without any waste of material.

Lightweight blocks are made of aerated concrete. It is cured until it reaches the construction site. So, it can be used as a very durable and strong material in the structure of the building.

2. Facade Bricks Wall:

The brick facade is known as the brick veneer. It is provided on the walls of the building as a layer of brick. The brick facade aesthetics and insulates the building.

This type of brick is generally durable and practically maintenance-free. The brick facade does not lose its luster. The brick facade is environmentally friendly.

3. Hollow Bricks Wall:

Hollow bricks are perforated in the horizontal or vertical direction. When hollow bricks are compared with other traditional bricks, hollow bricks perform better.

Hollow bricks are made using materials such as recycled waste and coal ash, rice dust, and fly ash. Therefore, it is used as an environmentally friendly building material. This type of brick is certified by the Green Building Council of India.

Since these bricks are much lighter in weight than solid bricks, their work can be done easily and quickly, which helps in the early completion of the project.

4. Non Load Bearing Partition Wall:

The partition wall is made to divide a room or area as an interior wall in a building. Generally, partition walls are non load bearing type walls.

Nowadays, partition walls divide a room into multi-rooms in a building. Partition walls are usually done to get the privacy and service of the room. However, depending on the design and requirements of the building, different types of partition walls are used.

Non Load Bearing Wall Framing-

Sometimes a non load bearing wall is required if the wall is built above the floor in a temporary office building. For this, different types of walls can be made using different materials. For non-load bearing wall is usually made using wood, steel, aluminum, and plastic, etc.

Wooden wall framing is required to make the wall vertical to the floor. For this, wooden frames are attached to the top, bottom, and side frames of the wall. The load-bearing wall should be strong enough to withstand wind or tilt loads.

Also Read:

How to Remove a Non Load Bearing Wall?

This type of wall can be removed very easily when repairing a building. This type of wall does not carry any frame structural load on it. Therefore, there is no need to support the wall using any hydraulic jack for renovation in the residential building. But if the wall is made of masonry material, the top of the wall should be partially removed step by step.

Before removing the Non Load Bearing Wall, cut off all electrical equipment and wires in the building. Also safely remove sharp or pointed tools along the side of the wall.

If the wall is made of wood or steel frame along the floor in the building, the wall can be easily removed.

Cost of Remove a Non Load Bearing Wall

Depending on the needs of the entire project it can cost between $ 300 and $ 10,000 to remove the wall in general. Cost factors include wall size, expert advice, and repairs to your floor and sidewalls.

Removing an interior, non-load-bearing wall is not a difficult task. In non-load-bearing wall removal, the wall is inspected for wiring, plumbing, or other elements.

Also Read:What Is Modified Proctor Test? | Purpose of Modified Proctor Test | Modified Proctor Compaction Test Apparatus | Modified Proctor Test Procedure | Calculation of Modified Proctor Test | Difference Between Standard Proctor Test Vs Modified Proctor Test

Advantages of Non Load Bearing Wall

Some of the advantages of this type of wall are described below:-

1. Building a non bearing wall involves less structural work and faster work. Also, you can use a non load-bearing wall for a more creative design.
2. These types of walls have the potential to reduce building costs in high-rise building projects. Because these types of walls are thinner, they take up less space on site.
3. In this type of wall opening for doors and windows can be made easily. Which does not affect the performance of the structure of the entire building.
4. Any non load-bearing walls can be removed for renovation, without losing the safety of the house structure.
5. The non load-bearing wall is made to reduce the dead load in the structure of the building.
6. This type of wall can be easily renovated by removing any part of the building at any time and in any area.

Disadvantages of Non Load Bearing Wall

1. Because these types of walls are usually thin and light, the insulation value may not be significantly higher than that of load-bearing walls.
2. During seismic action, the non-load-bearing wall works poorly in the structure of the building.
3. Construction of a non-load-bearing wall in an office building is usually slow.
4. Sometimes a non-loading wall is used in a high-ceilinged interior space that may require additional bracing to maintain stability.

Frequently Asked Questions (FAQ)

What Is a Non-Load Bearing Wall?

A non-load bearing wall is a type of wall used in building construction that does not support the weight of structure other than the wall itself1. It is also known as a “curtain wall”

What Is the Primary Purpose of Non-Load Bearing Walls in a Building?

A non-load bearing wall is a wall that doesn’t support floor roof loads above. It is not a part of the structural frame system and is built lighter to reduce the dead load of the structure. Most of the time, non-load bearing walls are interior walls whose purpose is to divide the floor into rooms. One can remove any non-load bearing walls without endangering the safety of the building. Non-load bearing walls can be identified by the joists and rafters

Can Non-Load Bearing Walls Be Removed for Future Renovations?

Yes, non-load bearing walls can be removed for renovation without compromising the safety of the building’s structure, as they do not provide structural support.

How Can One Distinguish Between Load-Bearing and Non-Load Bearing Walls?

To determine whether a wall is load-bearing or not, it is advisable to consult a designer or architect, especially when planning to remove walls for future renovations.

What Is the Cost of Removing a Non-Load Bearing Wall?

The cost of removing a non-load bearing wall can vary based on factors like wall size, expert advice, and any necessary floor or sidewall repairs. Generally, it can range from $300 to $10,000.

What Types of Materials Are Typically Used for Non-Load Bearing Walls?

Materials used in non-load bearing walls include

1. Wood
2. Steel
3. Aluminum
4. Plastic
5. Concrete (for concrete non-load bearing walls)

Like this post? Share it with your friends!

Suggested Read –

• What Is Porch Foundation? | Porch Foundation Options | How to Build a Porch Foundation?
• What Is Dynamic Compaction? | Types of Dynamic Compaction Process
• What Is Column? | Types of ColumnUsed in Construction
• What is Drain Tile? | How to Install Drain Tile Around Foundation